on 12-23-2021 1:26 AM
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen () cannot be resolved.
I tried the following and all got the same result.
Is there a solution?
Is it possible that the host name is incorrect?
sapcontrol -prot NI_HTTP -nr 00 -function Start
sapcontrol -prot NI_HTTP -nr 00 -host sapci -function Start
→ FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()<br>
sapcontrol -prot NI_HTTP -nr 00 -function GetInstanceProperties -debug
[Thr 140208756782912] NiIGetHostName: addr 127.0.0.1 = hostname 'localhost'
[Thr 140208756782912] NiPConnect: SiConnect failed for hdl 1/sock 4
[Thr 140208756782912] (SI_ECONN_REFUSE/2; UD; ST; /tmp/.sapstream50013)
[Thr 140208756782912] NiIInitSocket: set default settings for new hdl 1/sock 4 (I4; ST)
[Thr 140208756782912] BufSize: Min 0 Rcv 87380 Snd 16384
[Thr 140208756782912] NiIBlockMode: set blockmode for hdl 1 FALSE
[Thr 140208756782912] NiThrInit enter
[Thr 140208756782912] NiIConnectSocket: hdl 1 is connecting to 127.0.0.1:50013 (timeout=-1)
[Thr 140208756782912] SiPeekPendConn: connection of sock 4 broken (111-Connection refused)
[Thr 140208756782912] NiHLGetHostName: found address 127.0.0.1 in cache (valid-address/name)
[Thr 140208756782912] NiIGetHostName: addr 127.0.0.1 = hostname 'localhost'
[Thr 140208756782912] Thu Dec 23 10:14:39 2021
[Thr 140208756782912] ***LOG Q0I=> NiPConnect2: 127.0.0.1:50013: connect (111: Connection refused) [/bas/781_REL/src/base/ni/nixxi.cpp 3493]
[Thr 140208756782912] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 4
(SI_ECONN_REFUSE/111; I4; ST; 127.0.0.1:50013) [nixxi.cpp 3493]
[Thr 140208756782912] NiICloseHandle: closing initial hdl 1
23.12.2021 10:14:39
GetInstanceProperties
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()<br>
after kill process sapstartsrv
apci:ecdadm 95> ps aux | grep sapstartsrv
sapadm 1528 0.0 0.9 548440 72936 ? Ssl 10:02 0:00 /usr/sap/hostctrl/exe/sapstartsrv pf=/usr/sap/hostctrl/exe/host_profile -D
ecdadm 3859 0.9 1.0 689812 82940 ? Ssl 10:19 0:00 /usr/sap/ECD/D12/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_D12_sapci -D -u ecdadm
ecdadm 3874 0.2 1.0 689884 84228 ? Ssl 10:19 0:00 /usr/sap/ECD/ASCS10/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_ASCS10_sapci -D -u ecdadm
ecdadm 3983 0.0 0.0 12108 1072 pts/0 S+ 10:20 0:00 grep --color=auto sapstartsrv
kill -9 3859 3874
then
/usr/sap/ECD/D12/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_D12_sapci -D -u ecdadm
/usr/sap/ECD/ASCS10/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_ASCS10_sapci -D -u ecdadm
then I tried bottom
/usr/sap/ECD/D12/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_D12_sapci -D -u ecdadm
/usr/sap/ECD/ASCS10/exe/sapstartsrv pf=/usr/sap/ECD/SYS/profile/ECD_ASCS10_sapci -D -u ecdadm
then
sapcontrol -prot NI_HTTP -nr 00 -host sapci -function GetInstanceProperties -debug
sapci:ecdadm 94> sapcontrol -prot NI_HTTP -nr 00 -host sapci -function GetInstanceProperties -debug
[Thr 140013559863104] Thu Dec 23 10:19:53 2021
[Thr 140013559863104] NiIInit: max number of open files per process: 65536
[Thr 140013559863104] NiIInit: allocated nitab (no items: 2048, item size: 288, total: 589824)
[Thr 140013559863104] NiIInit: allocated nitab_free FtGetAdmSize = 32824
[Thr 140013559863104] NiIHSBufInit: initialize hostname buffer (IPv4)
[Thr 140013559863104] NiHLInit: alloc host buf (100 entries)
[Thr 140013559863104] NiSrvLInit: alloc serv bufs (100 entries)
[Thr 140013559863104] NiIInit: default selset type is SI_SEL_TYPE_EPOLL
[Thr 140013559863104] NiISapServNameCheck: sapctrl00 not supported (len 9)
[Thr 140013559863104] NiPGetServInfoError: func NiPGetServByName; sys getaddrinfo; log 0; isErr 1; errorNo -8
[Thr 140013559863104] NiSrvLGetServNo: service name 'sapctrl00' not found by operating system
[Thr 140013559863104] NiInit3: NI already initialized (init=1;cur=2048)
[Thr 140013559863104] NiHLGetNodeAddr: get addr for hostname 'sapci' (mode=0)
[Thr 140013559863104] addrinfo of 'sapci':
[Thr 140013559863104] 0: 10.0.1.143:0 'sapci.local' RAW (2-2-3-0-16)
[Thr 140013559863104] NiHLGetNodeAddr: got address for hostname 'sapci' from operating system
[Thr 140013559863104] NiIGetNodeAddr: hostname 'sapci' = addr 10.0.1.143
[Thr 140013559863104] NiIGetServNo: servicename '50013' = port 50013
[Thr 140013559863104] NiICreateHandle: hdl 1 state NI_INITIAL_CON
[Thr 140013559863104] NiIInitSocket: set default settings for new hdl 1/sock 4 (UD; ST)
[Thr 140013559863104] NiIBlockMode: set blockmode for hdl 1 FALSE
[Thr 140013559863104] NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
[Thr 140013559863104] NiIConnectSocket: hdl 1 is connecting to /tmp/.sapstream50013 (timeout=-1)
[Thr 140013559863104] NiPConnect: SiConnect failed for hdl 1/sock 4
[Thr 140013559863104] (SI_ECONN_REFUSE/2; UD; ST; /tmp/.sapstream50013)
[Thr 140013559863104] NiIInitSocket: set default settings for new hdl 1/sock 4 (I4; ST)
[Thr 140013559863104] BufSize: Min 0 Rcv 87380 Snd 16384
[Thr 140013559863104] NiIBlockMode: set blockmode for hdl 1 FALSE
[Thr 140013559863104] NiThrInit enter
[Thr 140013559863104] NiIConnectSocket: hdl 1 is connecting to 10.0.1.143:50013 (timeout=-1)
[Thr 140013559863104] SiPeekPendConn: connection of sock 4 broken (111-Connection refused)
[Thr 140013559863104] ***LOG Q0I=> NiPConnect2: 10.0.1.143:50013: connect (111: Connection refused) [/bas/781_REL/src/base/ni/nixxi.cpp 3493]
[Thr 140013559863104] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 4
(SI_ECONN_REFUSE/111; I4; ST; 10.0.1.143:50013) [nixxi.cpp 3493]
[Thr 140013559863104] NiICloseHandle: closing initial hdl 1
Hi kyoko_otawa
where i come from they say few ideas and very confused...
Today my crystal ball reader works so let's start with the solution, sapcontrol should point to the right instance number which , in your case , its not 00 but 10 for ASCS and 12 for DI (like sapcontrol -prot NI_HTTP -nr 10 ) thats why sapcontrol cannot connect with port 50013
So here are my answers:
Is there a solution? Yes, as per above
Is it possible that the host name is incorrect? i don't think so, no
You can help yourself reading here
A couple of FYI points:
- when you start your sap, start first the ASCS then DI
- S/4 HANA tag was probably wrong, wasnt it?
Thats it, I'm sure you can mark this topic as answered 🙂
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
thank you.
Thanks to you, I was able to solve it.
sapcontrol -prot NI_HTTP -nr 12 -host sapci -function Stop
sapcontrol -prot NI_HTTP -nr 12 -host sapci -function StopSystem
sapcontrol -prot NI_HTTP -nr 12 -host sapci -function StartSystem
sapcontrol -prot NI_HTTP -nr 12 -host sapci -function Start
those commands worked correctly.
but, 3201 process port doesn't listen.
sapci:ecdadm 64> netstat -an | grep 3201
sapci:ecdadm 65>
is there somting wrong?
try netstat -an | grep 3212
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
100 | |
8 | |
8 | |
5 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.