on 01-19-2016 6:33 AM
Dear experts
while installing SAP NW7.31 i throws error for invalid user/password in create userstoreICM
I have downloded this kernal which is 7.21
Kernel 7.21 for Linux (X86_64, on Power) 51049976
but it need 7.21 ext which is below one , shall i give this when it ask for kernal
ZIP 51049983_4 721 EXT UC Kernel for SWPM SP9 - Linux on X86_64
then how should i upgrade swpm kernal with above files and which file to use
i used following media
Dear all
i am installing SAP NW 7.31 as ABAP with following media
510443228 part1
510443228 part2
51041939_1 to 6
51044253_19 kernal kernal is 7.31
51047747 ocl
swpm01 sp 07
it throughs error in create icmstore i am on this error from 2 days
r3trans -d shows 0012 error username or password incorrect
saplikey : cannot connect to database
dev_saplikey : cannot connect to database username or password incorrect
I found below answer for this how to implement this i have downloaded two zip file
in the install master of NW731, sap suggest use Software Provisioning Manager 1.0 to do installation. I used the new 720 EXT kernel instead of old one and the installation process complete successfully.
Need some suggestions on this
Regards
Dear Rajendra,
When you face any issue regarding the password or cannot change the password of DDIC user.
Then 99% of this type of issue , get resolve by upgrading the kernel.
You would have resolve the issue , by upgrading the kernel to 720 EXT patch <latest> instead of using new SWPM
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear
Thanks for your immediate reply
My installation is still stuck is not over i got error on 25th step now i downloaded new kernal 7.21 ext and start the installation and select new option for installation and select new kernal when it ask for kernal 731 i gave 7.21 ext and went forward so i have to wait and see what could be the outcome when i reach to create icm userstore
Regrads
Dear
again i stuck same step with new logs as follows
fiorid:orafid 80> R3trans -d
This is R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'FID'"
R3trans finished (0012).
---------------------
cat trans.log
4 ETW000 R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.01.2016 - 14:53:03
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Jan 19 14:53:03 2016 5144 0.005144
4 ETW000 [ dev trc,00000] db_con_init called 33 0.005177
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 41 0.005218
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 29 0.005247
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 19 0.005266
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/FID/SYS/exe/run/dboraslib.so' ... 45 0.005311
4 ETW000 [ dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/FID/SYS/exe/run/dboraslib.so"), hdl 0
4 ETW000 160770 0.166081
4 ETW000 [ dev trc,00000] Library '/usr/sap/FID/SYS/exe/run/dboraslib.so' loaded 29 0.166110
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/FID/SYS/exe/run/dboraslib.so
4 ETW000 39 0.166149
4 ETW000 [ dev trc,00000] Version of '/usr/sap/FID/SYS/exe/run/dboraslib.so' is "720.00", patchlevel (0.114)
4 ETW000 83 0.166232
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/FID/SYS/exe/run/dboraslib.so
4 ETW000 32 0.166264
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/FID/SYS/exe/run/dboraslib.so
4 ETW000 60 0.166324
4 ETW000 [ dev trc,00000] New connection 0 created 42 0.166366
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 43 0.166409
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 27 0.166436
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.166460
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 32 0.166492
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 55 0.166547
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 26 0.166573
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol 32 0.166605
4 ETW000 ==> connect info for default DB will be read from ssfs
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 42 0.166647
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [rsecssfs.c 836] 42 0.166689
4 ETW000 [ dev trc,00000] Tue Jan 19 14:53:04 2016 61144 0.227833
4 ETW000 [ dev trc,00000] RSecSSFs: Configuration data read from environment parameters [rsecssfs.c 3664]
4 ETW000 38 0.227871
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "/usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT" cannot be opened for read [rsecssfs.c 2198]
4 ETW000 63 0.227934
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: Data file "/usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT" cannot be opened for read) [rsecssfs.c 897]
4 ETW000 41 0.227975
4 ETW000 [ dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT" cannot be opened for read
4 ETW000 40 0.228015
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 17 0.228032
4 ETW000 [ dbcon.c ,00000] *** ERROR => Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
4 ETW000 29 0.228061
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'FID'"
----------------------------------
[root@fiorid ABAP]# cat dev_likey
---------------------------------------------------
trc file: "dev_likey", trc level: 1, release: "720"
---------------------------------------------------
Tue Jan 19 15:17:04 2016
MtxInit: 0 0 0
Loading DB library '/usr/sap/FID/SYS/exe/run/dboraslib.so' ...
Library '/usr/sap/FID/SYS/exe/run/dboraslib.so' loaded
Version of '/usr/sap/FID/SYS/exe/run/dboraslib.so' is "720.00", patchlevel (0.114)
read_con_info_ssfs(): DBSL supports extended connect protocol
==> connect info for default DB will be read from ssfs
Register application info.
Oracle client version: 11.2.0.3.0, V2, default build, (dbsl 720 081211, UNICODE[2])
Installed Oracle client patches:
# Patch 14489591 : Created on 19 Jan 2013, 20:08:26 hrs PST8PDT
# Patch 14042380 : Created on 23 Dec 2013, 22:24:52 hrs PST8PDT
# Patch description: Created on 7 Jan 2014, 02:20:21 hrs PST8PDT
# Patch 13508485 : Created on 21 Dec 2011, 13:23:38 hrs PST8PDT
# Patch 11742262 : Created on 7 Mar 2012, 12:22:41 hrs CET
Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
Connecting as SAPSR3/<pwd>@FID on connection 0 (nls 0) ... (dbsl 720 081211, UNICODE[2])
Attaching to database server FID (con=0, svchp=1434e70, srvhp=1437378)
Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=1434e70, srv=1437378, usr=146db98)
Tue Jan 19 15:17:05 2016
OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:
ORA-01017: invalid username/password; logon denied
*** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 14533]
***LOG BY2=> sql error 1017 performing CON [dblink 540]
***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink 540]
*** ERROR => saplikey: failed to connect to the database. [saplikey_w.c 762]
[root@fiorid ABAP]#
-------------------------
[root@fiorid ABAP]# cat saplikey.log
saplikey: failed to connect to the database.
[root@fiorid ABAP]#
Suggest the solutions
Regards
Hi Rajendra,
You need to configure SSFS for oracle.
"/usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT" cannot be opened for read) [rsecssfs.c 897]
4 ETW000 41 0.227975
4 ETW000 [ dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT" cannot be opened for read
With Regards
Ashutosh Chaturvedi
Dear
I have Implemented SSFS as u said
|-------------------------------------------------------------------------|
| Record Key | Status | Timestamp of last Update |
|-------------------------------------------------------------------------|
| DB_CONNECT/DEFAULT_DB_PASSWORD | Encrypted | 2016-01-19 12:46:41 UTC |
| DB_CONNECT/DEFAULT_DB_USER | Plaintext | 2016-01-19 12:29:23 UTC |
|-------------------------------------------------------------------------|
Summary
-------
Active Records : 2 (Encrypted : 1, Plaintext : 1, Wrong Key : 0, Error : 0)
Outdated Records : 5 (occupied space can be released by the "compact" command)
Datafile Location : /usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT (when existing)
Keyfile Location : /usr/sap/FID/SYS/global/security/rsecssfs/key/SSFS_FID.KEY (when existing)
------------
[fidadm@fiorid ~]$ ls -l /usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT
-rw-------. 1 fidadm sapsys 1762 Jan 19 18:16 /usr/sap/FID/SYS/global/security/rsecssfs/data/SSFS_FID.DAT
-----------------
[fidadm@fiorid ~]$ R3trans -d
This is R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'FID'"
R3trans finished (0012).
-------------------------------------------------
SQL> drop table ops$sidadm.sapuser;
drop table ops$sidadm.sapuser
*
ERROR at line 1:
ORA-00942: table or view does not exist
then i have create it with
SQL> CREATE TABLE "OPS$FIDADM".SAPUSER
(USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$FIDADM".SAPUSER VALUES ('SAPSR3', 'System123'); 2
Table created.
----------------------------------------------------
orasid
sqlplus / as sysdba
alter system reset remote_os_authent scope=spfile;
------------
rsec/ssfs_datapath = $(DIR_GLOBAL)$(DIR_SEP)security$(DIR_SEP)rsecssfs$(DIR_SEP)data
rsec/ssfs_keypath = $(DIR_GLOBAL)$(DIR_SEP)security$(DIR_SEP)rsecssfs$(DIR_SEP)key
rsdb/ssfs_connect = 1
----------------------------
then shutdown system and startup again
then also it show same error
i ran installation with Root user should i change to sidadm
Kindly suggest where i went wrong it is very urgent..................
Regards
Dear
R3trans.log
[fidadm@fiorid ~]$ R3trans -d
This is R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'FID'"
R3trans finished (0012).
-------------------------------------
trans.log
[fidadm@fiorid ~]$ trans.log
/home/fidadm/trans.log: line 1: syntax error near unexpected token `('
/home/fidadm/trans.log: line 1: `4 ETW000 R3trans version 6.22 (release 720 - 18.11.11 - 11:29:00).'
Regards
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.