Skip to Content
avatar image
Former Member

EHp6 error MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/SUBMOD_CRR_LAST_CHTRANS/RUN_CRR_LAST were negative!

Hello I  am  performing upgrade from EHP4 to EHP6 on HP-ux  system  Oracle using Latest  SUM 1.0  SP13   and near 0 down time option

and receive the following error :

During the execution phase

Right at beginning

Checks after phase MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/SUBMOD_CRR_LAST_CHTRANS/RUN_CRR_LAST were negative!

Last error code set: Single errors (code <= 8) found in logfile 'RSCRRLST.ELG'

ERROR:
Batchjob RSUPG_ISU_CRR on shadow system failed.
Detected the following errors:

# /usr/sap/put/ehp6/SUM/abap/log/RSCRRLST.D01:
A4 ESCRR 078 Parallel process "4" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "5" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "6" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "7" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "8" finished at "05/25/2015"("01:20:13")
A2EESCRR 079 Parallel process "1" aborted at "05/25/2015"("01:20:14")
A2EESCRR 079 Parallel process "1" aborted at "05/25/2015"("01:20:14")
A3WESCRR 213 Process "1" restarted "asynchronously" after abort at "01:20:14"("05/25/2015")
A4 ESCRR 078 Parallel process "1" finished at "05/25/2015"("01:20:15")
A4 ESCRR 056 Transition &2"ISU" failed for scenario &1"LAST_TRANSFER"
A2EESCRR 142 Agent detected aborted jobs
# /usr/sap/put/ehp6/SUM/abap/log/RSCRRLST_1.D01:
A4 ESUPG 304 Start time.....: "05.25.2015" "01:20:12"
A4 ESUPG 002 " "

...skipped 6 more lines.
Please see RSCRRLST.html for more information.

Here is     RSCRRLST,html

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Final data transfer of change recording framework ERRORS and RETURN CODE in RSCRRLST.D01
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A4 ESCRR 078 Parallel process "4" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "5" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "6" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "7" finished at "05/25/2015"("01:20:13")
A4 ESCRR 078 Parallel process "8" finished at "05/25/2015"("01:20:13")
A2EESCRR 079 Parallel process "1" aborted at "05/25/2015"("01:20:14")
A2EESCRR 079 Parallel process "1" aborted at "05/25/2015"("01:20:14")
A3WESCRR 213 Process "1" restarted "asynchronously" after abort at "01:20:14"("05/25/2015")
A4 ESCRR 078 Parallel process "1" finished at "05/25/2015"("01:20:15")
A4 ESCRR 056 Transition &2"ISU" failed for scenario &1"LAST_TRANSFER"
A2EESCRR 142 Agent detected aborted jobs

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Final data transfer of change recording framework ERRORS and RETURN CODE in RSCRRLST_1.D01
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A4 ESUPG 304 Start time.....: "05.25.2015" "01:20:12"
A4 ESUPG 002 " "
A4 ESUPG 001 -------------------------------------------------------------------------
A4 ESCRR 137 CRR_OPERATION with process nr "1" running in single mode
A4 ESCRR 114 Starting parallel operation "CL_IUUC_TRANSFER" for task "COVRES"
A2EESCRR_IUUC 142 Transferfunction '"/1CRR/CTRR00000000000000005868"' failed with returncode '"2"'
A2EESCRR 143 Process "1" aborted
A2EESCRR 143 Process "1" aborted

Here is my preprocessing step just before downtime



Says 100%

So I start downtime and  get the  error .

So I look at   tran  CRR_CONTROL  in shadow instance  and I see this 

  I looked at SM37  a few days back  and I see  couple of aborted jobs

I am wondering  why the upgrade did not  give me an error message  on the 19th  ?

SM37

Have also looked at note  1678564

And related link  links

http://scn.sap.com/thread/3551906

http://scn.sap.com/thread/3729481

http://scn.sap.com/thread/3643834

1.png (130.3 kB)
2.png (183.5 kB)
3.png (71.2 kB)
4.png (182.6 kB)
5.png (63.7 kB)
6.png (52.2 kB)
7.png (99.7 kB)
Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

5 Answers

  • Best Answer
    avatar image
    Former Member
    Jun 07, 2015 at 07:45 AM

    Hi Kenneth,

    I am stuck with the same issue in my upgrade. The go-live date is today.

    Can anyone please share the resolution?

    Thanks,

    Aanchal Singh

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    May 27, 2015 at 04:55 PM

    Hello Kenneth,

    Post RSCRRLST.ELG and if any logs related to this.

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      Hi Kenneth,

      Suggest you to follow SAP Note   1678564 - Restrictions, Database-specific Settings, and Troubleshooting of nZDM for SUM

      & steps

      5.5. Phase RUN_CRR_LAST: No tasks exist for transition "LAST_TRANSFER" and scenario "ISU"
      The above mentioned error message is displayed in log file RSCRRLST.ELG. To solve the issue, proceed as follows:

      1. Log on to the shadow instance.
      2. Stop and Start the transfer as described in in section 4.1.
      3. Repeat the phase.

      4.1. Stop and start the replication processes

      1. Stop the CRR replication by selecting => Control -> Stop Transfer
      2. Start the CRR replication by selecting => Control -> Start Transfer

      Errors from previous replication will be deleted.

      Hope this would help you.If still issue persists re-share the RSCRRLST.ELG

      Regards,

  • avatar image
    Former Member
    May 28, 2015 at 03:50 AM

    Hi Kenneth,

    Addition to my revert you could also refer & follow similar SCN thread at

    This will surely help you to resolve the issue.

    Good luck !!

    Add comment
    10|10000 characters needed characters exceeded

  • Jun 04, 2015 at 04:05 PM

    HI Kenneth,

    I think transfer is already stopped. Kindly select the table and click on the button as pointed out into the below screenshot to retransfer. If it is transfered successfully then start the transfer and repeat the phase.

    Thanks & Regards,

    Ashish

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member Former Member

      HI I already replied, see next message, I would like to know what versoon of sum you are using and did you error on the same table covres ?

  • avatar image
    Former Member
    Jun 07, 2015 at 02:16 PM

    Hi Kenneth,

    Thanks for updating us.

    Regards,

    Add comment
    10|10000 characters needed characters exceeded