Error in PREP_INSTALL/RUN_RSPTBFIL_SPACE while upgrading stack

Hi Experts,

While upgrading our solman stack from SP04 to SP12 we are facing an issue in  PREP_INSTALL/RUN_RSPTBFIL_SPACE phase like below.

Please find the log files RSPTBSPACE_PH.log

1 ETQ201 Entering upgrade-phase "PREP_INSTALL/RUN_RSPTBFIL_SPACE" ("20150209214239")

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'

1 ETQ206 Executing pre-phase DB specific actions.

1 ETQ200 Executing actual phase 'PREP_INSTALL/RUN_RSPTBFIL_SPACE'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'RSPTBFIL'

2 ETQ399 Arg[1] = 'SAP_SPACE=SAP_RSPTBFIL(ACTION=INIT,LOGFILE=RSPTBSPACE.$(SAPSID))'

2 ETQ399 Arg[2] = 'NO-IGNORE'

2 ETQ399 Arg[3] = 'RSPTBSPACE\.$(SAPSID)'

2 ETQ399 Arg[4] = '30'

2 ETQ399 Arg[5] = 'PUTTB_SHD initial filling'

1 ETQ399 Using error summary log 'RSPTBSPACE_PH.ELG'.

1 ETQ399 Expanded phase arguments:

2 ETQ399 Arg[1] = 'SAP_SPACE=SAP_RSPTBFIL(ACTION=INIT,LOGFILE=RSPTBSPACE.DS1)'

2 ETQ399 Arg[3] = 'RSPTBSPACE\.DS1'

4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_SPACE=SAP_RSPTBFIL(ACTION=INIT,LOGFILE=RSPTBSPACE.DS1)" in batch

1 ETQ359 RFC Login to: System="DS1", AsHost="Host" Nr="00", GwHost="Host", GwService="sapgw00"

2 ETQ232 RFC Login succeeded

4 ETQ010 Date & Time: 20150209214240 

1 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC

2 ETQ373 parameter "IV_ABORT_ON_ERROR" = ""

2 ETQ373 parameter "IV_AUTHCKNAM" = "DDIC"

2 ETQ373 parameter "IV_BATCHHOST" = "Host"

2 ETQ373 parameter "IV_JOBNAME" = "RSPTBFIL"

2 ETQ373 parameter "IV_REPNAME" = "RSPTBFIL"

2 ETQ373 parameter "IV_SCHEDEVER" = "X"

2 ETQ373 parameter "IV_VARIANTTEXT" = "Generic RSPTBFIL Variant"

2 ETQ373 parameter "IV_VARNAME" = "SAP_SPACE"

2 ETQ373 parameter "IV_LANGUAGE" = "E"

2 ETQ399 Table TT_REPORTPARAM (#3):

3 ETQ399 "ACTION","P","","","INIT",""

3 ETQ399 "LOGFILE","P","","","RSPTBSPACE.DS1",""

3 ETQ399 "TABEX","P","","","4G",""

2 ETQ373 parameter "IV_BATCHINSTANCE" = ""

1 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded

4 ETQ010 Date & Time: 20150209214242 

2 ETQ373 parameter "EV_JOBCOUNT" = "21424100"

2 ETQ374 parameter "EV_STARTRC" = "0"

2 ETQ374 parameter "EV_VARIWRC" = "0"

4 ETQ311 Batch job "RSPTBFIL" with job count "21424100" scheduled

2 ETQ399 'SUBST_CHECK_BATCHJOB' for JOBNAME='RSPTBFIL' JOBCOUNT='21424100' returns 'R'.

1 ETQ359 RFC Login to: System="DS1", AsHost="Host" Nr="00", GwHost="Host", GwService="sapgw00"

2 ETQ232 RFC Login succeeded

4 ETQ010 Date & Time: 20150209214312 

1 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC

2 ETQ373 parameter "JOBNAME" = "RSPTBFIL"

2 ETQ373 parameter "JOBCOUNT" = "21424100"

2 ETQ373 parameter "IV_VERIFY" = " "

1 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded

4 ETQ010 Date & Time: 20150209214312 

2 ETQ373 parameter "JOBSTATUS" = "A"

2 ETQ374 parameter "RC_CHECK" = "0"

2 ETQ373 parameter "JOBENDDATE" = "20150209"

2 ETQ373 parameter "JOBENDTIME" = "214246"

2EETQ262 Batchjob "RSPTBFIL" aborted

1EETQ399 Last error code set is: Batchjob 'RSPTBFIL' with id '21424100' aborted

1EETQ204 Upgrade phase "RUN_RSPTBFIL_SPACE" aborted with severe errors ("20150209214312")

Any resolution to resolve the issue will be greatly appreciated...

Thank you in Advance..

Regards,

Jana

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

8 Answers

  • avatar image
    Former Member
    Feb 10, 2015 at 04:24 AM

    Hi,

    Could you share job log for RSPTBFIL ?

    Regards,

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Feb 10, 2015 at 04:35 AM

    Hi Jana,

    If possible try to restart the system & rerun the process.Also refer SAP Note  1678780 - Installation or upgrade BI_CONT/BI_CONT_XT 707/737/747

    Good luck,

    Gaurav

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Feb 10, 2015 at 04:44 AM

    Hi Janardhan,

    Try to run the /$sync transaction and retry the step.

    Moreover check the job log for RSPTBFIL.

    With Regards

    Ashutosh Chaturvedi

    Add comment
    10|10000 characters needed characters exceeded

    • Hi Chaturvedi,

      We have executed the above Tx--> /$sync and tried to rerun the SUM tool but no luck. Also we are unable to find the RSPTBFIL log file.

      Can you please help us to move forward.

      Thanks in advance..

      Regards,

      Jana

  • avatar image
    Former Member
    Feb 10, 2015 at 05:04 AM

    Hi Jana,

    Are you able to locate the job log RSPTBFIL from SM37 .

    Regards,

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Feb 10, 2015 at 05:31 AM

    Hi Jana,

    Is this complete job details for RSPTBFIL ? Addition to it could you share system logs from SM21 .I suppose this issue could be due to any Add-On here & suggest you to raise a support ticket as well with SAP.

    Regards,

    Add comment
    10|10000 characters needed characters exceeded

  • avatar image
    Former Member
    Feb 10, 2015 at 05:35 AM

    Could you share RSPTBSPACE_PH.ELG file too for analysis.

    Regards,

    Add comment
    10|10000 characters needed characters exceeded

    • Hi Rana,

      Thank you for your quick response.. we are unable to find the RSPTBSPACE_PH.ELG log file.

      We are going to raise an OSS ticket on the issue.

      Thanks for your support..

      Regards,

      Jana

  • Feb 10, 2015 at 10:52 AM

    Hi Jana ,

    Please post  the SM21 and dev_w*  ( the  work process on which the job ran )

    Please check the SAP Note

    1537798 - RSPTBFIL: NO_ACCESS_TO_DATABASE_CATALOGUE


    Thanks ,

    Manu

    Add comment
    10|10000 characters needed characters exceeded

  • Dec 23, 2015 at 12:30 AM

    Hi Janardhan, how are you?

    Could you please post what was the fix for this issue since Im facing the same error.

    Best

    Martin

    Add comment
    10|10000 characters needed characters exceeded

    • Hi Jana

      SAP did not provide assistance?

      Since Im facing the same error or two Upgrades from 7.31 to 7.5

      Both systems are copies but using different SUM patch levels, nevertheless on both steps failed.

      So Im relunctant to restart the upgrade since I would occur again.

      Best

      Martin

Skip to Content