Skip to Content
avatar image
Former Member

Update to SP04 : Tomcat does not start

Hi,

I think that I have solved my licence issue (see previous thread), but Tomcat does not start. I've applied PL02 after this SP4, that's not better.

I have a serice called "ServeurPortail16" pointing to:

"C:\Program Files (x86)\Sybase\Portail PowerAMC 16\Tomcat\bin\tomcat6.exe" //RS//ServeurPortail16

The last messages in Tomcat log when I try to start this service are :

16 janv. 2015 10:28:36 org.apache.tomcat.util.digester.Digester startElement

GRAVE: Begin event threw exception

java.lang.ClassNotFoundException: org.apache.catalina.mbeans.ServerLifecycleListener

    at java.net.URLClassLoader$1.run(Unknown Source)
...

16 janv. 2015 10:28:36 org.apache.catalina.startup.Catalina load

ATTENTION: Catalina.start using conf/server.xml: Error at (31, 78) : org.apache.catalina.mbeans.ServerLifecycleListener

16 janv. 2015 10:28:36 org.apache.catalina.startup.Catalina start

GRAVE: Cannot start server. Server instance is not configured.

The conf/server.xml is below, I don't know what to do with it :-\    Any idea ?

<?xml version='1.0' encoding='utf-8'?>

<!--

  Licensed to the Apache Software Foundation (ASF) under one or more

  contributor license agreements.  See the NOTICE file distributed with

  this work for additional information regarding copyright ownership.

  The ASF licenses this file to You under the Apache License, Version 2.0

  (the "License"); you may not use this file except in compliance with

  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software

  distributed under the License is distributed on an "AS IS" BASIS,

  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

  See the License for the specific language governing permissions and

  limitations under the License.

-->

<!-- Note:  A "Server" is not itself a "Container", so you may not

     define subcomponents such as "Valves" at this level.

     Documentation at /docs/config/server.html

-->

<Server port="8005" shutdown="SHUTDOWN">

  <!--APR library loader. Documentation at /docs/apr.html -->

  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />

  <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->

  <Listener className="org.apache.catalina.core.JasperListener" />

  <!-- Prevent memory leaks due to use of particular java/javax APIs-->

  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />

  <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html -->

  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />

  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

  <!-- Global JNDI resources

       Documentation at /docs/jndi-resources-howto.html

  -->

  <GlobalNamingResources>

    <!-- Editable user database that can also be used by

         UserDatabaseRealm to authenticate users

    -->

    <Resource name="UserDatabase" auth="Container"

              type="org.apache.catalina.UserDatabase"

              description="User database that can be updated and saved"

              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"

              pathname="conf/tomcat-users.xml" />

  </GlobalNamingResources>

  <!-- A "Service" is a collection of one or more "Connectors" that share

       a single "Container" Note:  A "Service" is not itself a "Container",

       so you may not define subcomponents such as "Valves" at this level.

       Documentation at /docs/config/service.html

   -->

  <Service name="Catalina">

 

    <!--The connectors can use a shared executor, you can define one or more named thread pools-->

    <!--

    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"

        maxThreads="150" minSpareThreads="4"/>

    -->

   

   

    <!-- A "Connector" represents an endpoint by which requests are received

         and responses are returned. Documentation at :

         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)

         Java AJP  Connector: /docs/config/ajp.html

         APR (HTTP/AJP) Connector: /docs/apr.html

         Define a non-SSL HTTP/1.1 Connector on port 8080

    -->

    <Connector protocol="HTTP/1.1"

       port="3030"

               connectionTimeout="20000"

               redirectPort="8443" />

    <!-- A "Connector" using the shared thread pool-->

    <!--

    <Connector executor="tomcatThreadPool"

               port="8080" protocol="HTTP/1.1"

               connectionTimeout="20000"

               redirectPort="8443" />

    -->          

    <!-- Define a SSL HTTP/1.1 Connector on port 8443

         This connector uses the JSSE configuration, when using APR, the

         connector should be using the OpenSSL style configuration

         described in the APR documentation -->

   

    <Connector protocol="org.apache.coyote.http11.Http11Protocol" SSLEnabled="true"

       port="3443"

       keystoreFile="C:\Program Files (x86)\Sybase\Portail PowerAMC 16\keystore\server.keystore"

    keystorePass="changeit" maxThreads="150" scheme="https" secure="true"

    clientAuth="false" sslProtocol="TLS"  />

   

    <!-- Define an AJP 1.3 Connector on port 8009 -->

    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />

    <!-- An Engine represents the entry point (within Catalina) that processes

         every request.  The Engine implementation for Tomcat stand alone

         analyzes the HTTP headers included with the request, and passes them

         on to the appropriate Host (virtual host).

         Documentation at /docs/config/engine.html -->

    <!-- You should set jvmRoute to support load-balancing via AJP ie :

    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">        

    -->

    <Engine name="Catalina" defaultHost="localhost">

      <!--For clustering, please take a look at documentation at:

          /docs/cluster-howto.html  (simple how to)

          /docs/config/cluster.html (reference documentation) -->

      <!--

      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>

      -->       

      <!-- The request dumper valve dumps useful debugging information about

           the request and response data received and sent by Tomcat.

           Documentation at: /docs/config/valve.html -->

      <!--

      <Valve className="org.apache.catalina.valves.RequestDumperValve"/>

      -->

      <!-- This Realm uses the UserDatabase configured in the global JNDI

           resources under the key "UserDatabase".  Any edits

           that are performed against this UserDatabase are immediately

           available for use by the Realm.  -->

      <Realm className="org.apache.catalina.realm.UserDatabaseRealm"

             resourceName="UserDatabase"/>

      <!-- Define the default virtual host

           Note: XML Schema validation will not work with Xerces 2.2.

       -->

      <Host name="localhost"  appBase="webapps"

            unpackWARs="true" autoDeploy="true"

            xmlValidation="false" xmlNamespaceAware="false">

        <!-- SingleSignOn valve, share authentication between web applications

             Documentation at: /docs/config/valve.html -->

        <!--

        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />

        -->

        <!-- Access log processes all example.

             Documentation at: /docs/config/valve.html -->

        <!--

        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" 

               prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>

        -->

      </Host>

    </Engine>

  </Service>

</Server>

Add comment
10|10000 characters needed characters exceeded

  • Get RSS Feed

2 Answers

  • Jan 16, 2015 at 09:31 PM

    Hi Christophe,

    Have you tries just going to the base Tomcat URL to see if Tomcat is not running vs. the PowerAMC deployment?

    -Matt C.

    Add comment
    10|10000 characters needed characters exceeded

    • Former Member

      The support told me to reinstall from scratch. I had another issue with the license, but I completed the install. Technically Tomcat runs, but the pàortal hangs after logging.

  • avatar image
    Former Member
    Jan 19, 2015 at 09:37 AM

    Hi Christophe,

    I had similar issues with the portal when I upgraded to SP04.

    I was able to solve it by installing it from scratch to the default installation directory in the setup: "C:\Program Files\SAP\PowerDesigner Portal 16".

    Mehmet

    Add comment
    10|10000 characters needed characters exceeded