Skip to Content
author's profile photo Former Member
Former Member

batchjob RSVBCHCK failed

Hi Experts,

I am doing SOLMAN71 upgrade to SPS11 by using SUM SP11 after SOLMAN installation.

However, I got this error during SUM upgrade. Please advise if you have any solutions.

The error message from log file is very general which did not provide details error message as below.

I have checked SM13 and SMQ1. But, cannot find any entry.

4 EPU201XBEGIN OF SECTION BEING ANALYZED LASTOFFSET 2572 NOW BEGIN OF JOB_RSVBCHCK_PRE =========

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_PRE ======== BEGIN OF JOB_RSVBCHCK2 =============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK2 =========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202X====MARK ANALYZED SECTION==== END OF JOB_RSVBCHCK_D ========== BEGIN OF JOB_RSVBCHCK_D ============

1 ETH010XRSVBCHCK: Check of open update requests

2EETG050 Update records still exist - Please process

4 EPU202XEND OF SECTION BEING ANALYZED END OF JOB_RSVBCHCK_D ===============================================

1 ETQ201 Entering upgrade-phase "MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/JOB_RSVBCHCK_D" ("20140718232454")

2 ETQ367 Connect variables are set for standard instance access

4 ETQ399 System-nr = '03', GwService = 'sapgw03' Client = '000'

4 ETQ399 Environment variables:

4 ETQ399 dbs_mss_schema=<null>

4 ETQ399 auth_shadow_upgrade=<null>

1 ETQ206 Executing pre-phase DB specific actions.

1 ETQ200 Executing actual phase 'MAIN_SWITCH/SUBMOD_SWITCH_OLDREL/JOB_RSVBCHCK_D'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'RSVBCHCK'

2 ETQ399 Arg[1] = ''

2 ETQ399 Arg[2] = 'NO-IGNORE'

2 ETQ399 Arg[3] = 'RSVBCHCK\.$(SAPSID)'

2 ETQ399 Arg[4] = '5'

2 ETQ399 Arg[5] = 'CHECK OF UPDATE TASK'

1 ETQ399 Using error summary log 'PSVBCHCK.ELG'.

1 ETQ399 Expanded phase arguments:

2 ETQ399 Arg[3] = 'RSVBCHCK\.SM2'

4 ETQ260 Starting batchjob "RSVBCHCK"

1 ETQ359 RFC Login to: System="SM2", AsHost="NORSECECC6SM" Nr="03", GwHost="NORSECECC6SM", GwService="sapgw03"

2 ETQ232 RFC Login succeeded

4 ETQ010 Date & Time: 20140718232454

1 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC

2 ETQ373 parameter "BATCHHOST" = "NORSECECC6SM"

2 ETQ373 parameter "JOBNAME" = "RSVBCHCK"

2 ETQ373 parameter "REPNAME" = "RSVBCHCK"

2 ETQ373 parameter "VARNAME" = ""

2 ETQ373 parameter "IV_SCHEDEVER" = " "

2 ETQ373 parameter "BATCHINSTANCE" = ""

1 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded

4 ETQ010 Date & Time: 20140718232454

2 ETQ373 parameter "JOBCOUNT" = "23245400"

2 ETQ374 parameter "RC_START" = "0"

4 ETQ311 Batch job "RSVBCHCK" with job count "23245400" scheduled

1 ETQ359 RFC Login to: System="SM2", AsHost="NORSECECC6SM" Nr="03", GwHost="NORSECECC6SM", GwService="sapgw03"

2 ETQ232 RFC Login succeeded

4 ETQ010 Date & Time: 20140718232454

1 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC

2 ETQ373 parameter "JOBNAME" = "RSVBCHCK"

2 ETQ373 parameter "JOBCOUNT" = "23245400"

2 ETQ373 parameter "IV_VERIFY" = " "

1 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded

4 ETQ010 Date & Time: 20140718232454

2 ETQ373 parameter "JOBSTATUS" = "F"

2 ETQ374 parameter "RC_CHECK" = "0"

2 ETQ373 parameter "JOBENDDATE" = "20140718"

2 ETQ373 parameter "JOBENDTIME" = "232454"

4 ETQ263 Batchjob "RSVBCHCK" finished successfully

1 ETQ124 Scanned file 'log\RSVBCHCK.SM2' from offset 2468 to 2572 for errors.

4 ETQ010 Date & Time: 20140718232454

1EETQ399 Last error code set is: Single errors (code <= 8) found in logfile 'PSVBCHCK.ELG'

1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors ("20140718232454")

Thank you.

Por.

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

2 Answers

  • Best Answer
    Posted on Jul 19, 2014 at 02:07 PM

    Hi,

    Can you share PSVBCHCK.ELG

    Divyanshu

    Add a comment
    10|10000 characters needed characters exceeded

  • author's profile photo Former Member
    Former Member
    Posted on Jul 19, 2014 at 03:21 PM

    Hi All,

    The error solved after remove the entry in VBHDR and VBERROR.

    Thank you for your advise.

    Por.

    Add a comment
    10|10000 characters needed characters exceeded

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.