Skip to Content
author's profile photo Former Member
Former Member

Upgrade Solution Manager 7.0 to 7.1

Hello, TechSupport!

I am upgrading SAP Solution Manager from 7.0 up to 7.1. Phase MAIN_SHDRUN/ACT_UPG is running for 7 days.

It is ok ? How can I find that SUM is hungs up or upgrade is running good ?

TP is running:

There is no running jobs in SM37

Phasexe.trc:

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/JOB_RBCA_FSP_UPG_WRITE' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RUN_RSINCGEN_SHD1' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SETSYNC_SHD_STARTED' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RFCDEST_CREATE_S2O' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/DIFFEXPDDIC_IP' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_SHDPREPEXP/ADDTOHEAP_SFW' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/RUN_RDDIT006' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/DIFFEXP_TMPSAP' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RUNASYN_RSGENLOAD' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/JOB_SRM_PRE_CHECKS_2' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/RUN_RUTPREDEPVIEWS4DEL' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/BUFFEROP_ACTUPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_SHDPREPEXP/JOB_DL4TA_UPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/JOB_RDDSAVTE' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/DDIC_UPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/SQLDB_WCONT2UPP1' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/START_SHDI_FIRST' - ignored!

ALOG702:

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/NTACT_DELPRE:

ALL SM1.ALL \ 0000 20131226201131 sm1adm sap_server 20131226201112004e38

ALL SM1.ALL \ 0000 20131226201140 sm1adm sap_server 20131226201112005d18

ALL SM1.ALL \ 0000 20131226201146 sm1adm sap_server 201312262011120058fc

ALL SM1.ALL \ 0000 20131226201147 sm1adm sap_server 201312262011120059d0

ALL SM1.ALL \ 0000 20131226201148 sm1adm sap_server 20131226201112005b60

ALL SM1.ALL \ 0000 20131226201211 sm1adm sap_server 20131226201112005cb0

ALL SM1.ALL \ 0000 20131226201234 sm1adm sap_server 20131226201112005a44

ALL SM1.ALL \ 0000 20131226201255 sm1adm sap_server 2013122620111200588c

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/JOB_SFW_UPG:

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/ADDTOHEAP_SFW:

### Phase MAIN_SHDRUN/JOB_UMOD20_UPG:

### Phase MAIN_SHDRUN/RUN_RADTBUCACT:

### Phase MAIN_SHDRUN/RUN_RUTPREDEPVIEWS4DEL:

### Phase MAIN_SHDRUN/DB6_ACTIONS:

### Phase MAIN_SHDRUN/BUFFEROP_ACTUPG:

### Phase MAIN_SHDRUN/SQLDB_SET_TIMESTAMP_E070SHD:

### Phase MAIN_SHDRUN/ACT_UPG:

ALL SM1.ALL a 0000 20131226201441 sm1adm sap_server 20131226201441005cc8

ALL SM1.ALL ( 0000 20131226201441 sm1adm sap_server 20131226201441005cc8

ALL SM1.ALL ) 0000 20131231104735 sm1adm sap_server 201312311047340044e4

ALL SM1.ALL ( 0000 20131231104759 sm1adm sap_server 20131231104758005dd0

### Phase MAIN_SHDRUN/ACT_UPG:

ALL SM1.ALL d 0000 20131231104803 sm1adm sap_server 20131231104803005b40

ALL SM1.ALL a 0000 20131231104804 sm1adm sap_server 201312311048030058b8

ALL SM1.ALL ( 0000 20131231104804 sm1adm sap_server 201312311048030058b8



SAPup.ECO:

### Phase MAIN_SHDRUN/ACT_UPG:

SAPup> Starting subprocess in phase 'ACT_UPG' at 20131231104803

ENV: DBMS_TYPE=ora

ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

ENV: ORACLE_HOME=D:\oracle\SM1\11203

ENV: ORACLE_SID=SM1

ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

ENV: SAPDATA_HOME=D:\oracle\SM1

ENV: SAPSYSTEMNAME=SM1

ENV: auth_shadow_upgrade=1

ENV: dbs_ora_schema=SAPSR3

ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE "pf=D:\sum\SUM\abap\var\ACTUPG.TPP" put SM1

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

Looking for effective putsteps ... ... ready (looking for putsteps)

SLOG702:

### Phase MAIN_SHDRUN/ACT_UPG:

START REMOVE STOPMARK ALL 20131226201436 sm1adm sap_server 20131226201436005cdc

STOP REMOVE STOPMARK ALL 20131226201436 sm1adm sap_server 20131226201436005cdc

START REMOVE STOPMARK SM1 20131226201441 sm1adm sap_server 20131226201441005c70

STOP REMOVE STOPMARK SM1 20131226201441 sm1adm sap_server 20131226201441005c70

START put SM1 20131226201441 sm1adm sap_server 20131226201441005cc8

START SET STOPMARK SM1 20131226201441 sm1adm sap_server 20131226201441005cc8

INFO: Buffer saved as D:\sum\SUM\abap\buffer\SM1SAV.

STOP SET STOPMARK SM1 20131226201441 sm1adm sap_server 20131226201441005cc8

LIST put SM1 (A{|

START tplock_eu SM1 ( 20131226201441 sm1adm sap_server 20131226201441005cc8

STOP tplock_eu SM1 ( 20131226201441 sm1adm sap_server 20131226201441005cc8

START DD ACTIVATION SM1 A 20131226201442 sm1adm sap_server 20131226201441005cc8

START tp_getprots SM1 J 20131226201442 sm1adm sap_server 20131226201441005cc8

START tpunlock_eu SM1 20131231104734 sm1adm sap_server 201312311047340044e4

STOP tpunlock_eu SM1 20131231104735 sm1adm sap_server 201312311047340044e4

START tplock_eu SM1 20131231104758 sm1adm sap_server 20131231104758005dd0

STOP tplock_eu SM1 20131231104759 sm1adm sap_server 20131231104758005dd0

### Phase MAIN_SHDRUN/ACT_UPG:

START REMOVE STOPMARK SM1 20131231104803 sm1adm sap_server 20131231104803005b40

STOP REMOVE STOPMARK SM1 20131231104803 sm1adm sap_server 20131231104803005b40

START put SM1 20131231104803 sm1adm sap_server 201312311048030058b8

START SET STOPMARK SM1 20131231104804 sm1adm sap_server 201312311048030058b8

INFO: Buffer saved as D:\sum\SUM\abap\buffer\SM1SAV.

STOP SET STOPMARK SM1 20131231104804 sm1adm sap_server 201312311048030058b8

LIST put SM1 (A{|

START tplock_eu SM1 ( 20131231104804 sm1adm sap_server 201312311048030058b8

STOP tplock_eu SM1 ( 20131231104804 sm1adm sap_server 201312311048030058b8

START tp_getprots SM1 J 20131231104804 sm1adm sap_server 201312311048030058b8

sap_server

PHASES.LOG:

1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/ACT_UPG" ("20131231104800")

4 ETQ399 Set database connect to shadow.

4 ETQ399 Set environment for shadow connect:

4 ETQ399 Set RFC variables for shadow connect:

4 ETQ399 System-nr = '12', GwService = 'sapgw12' Client = '000'

4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"

4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"

4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"

4 ETQ399 Requirement for tp maps to 'exe'

4 ETQ383 translates to path "D:\sum\SUM\abap\exe"

4 ETQ399 Set tool parameters for shadow connect:

4 ETQ399 default TPPARAM: SHADOW.TPP

2 ETQ366 Connect variables are set for shadow instance access

4 ETQ399 System-nr = '12', GwService = 'sapgw12' Client = '000'

4 ETQ399 Environment variables:

4 ETQ399 dbs_ora_schema=SAPSR3

4 ETQ399 auth_shadow_upgrade=<null>

1 ETQ200 Executing actual phase 'MAIN_SHDRUN/ACT_UPG'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'ACTUPG.BUF'

2 ETQ399 Arg[1] = 'ACTUPG.TP0'

2 ETQ399 Arg[2] = 'SHDINCIMP.BUF'

2 ETQ399 Arg[3] = ''

1 ETQ399 Using error summary log 'ACTUPG.ELG'.

1 ETQ399 Executing putsteps '{|(A'.

3 ETQ399 20131231104803: PID 23360 execute 'D:\sum\SUM\abap\exe\tp "pf=D:\sum\SUM\abap\var\SHADOW.TPP" delstopmark "buffer=SM1"' , output written to 'D:\sum\SUM\abap\log\TP.ECO'.

3 ETQ399 20131231104803: PID 23360 exited with status 0 (time 0.000 real)

3 ETQ399 20131231104803: PID 22712 execute 'D:\sum\SUM\abap\exe\tp "pf=D:\sum\SUM\abap\var\ACTUPG.TPP" put SM1' in background, output written to 'D:\sum\SUM\abap\log\SAPup.ECO'.

TP.ECO:

SAPup> Starting subprocess in phase 'ACT_UPG' at 20131231104803

ENV: DBMS_TYPE=ora

ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

ENV: ORACLE_HOME=D:\oracle\SM1\11203

ENV: ORACLE_SID=SM1

ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

ENV: SAPDATA_HOME=D:\oracle\SM1

ENV: SAPSYSTEMNAME=SM1

ENV: auth_shadow_upgrade=1

ENV: dbs_ora_schema=SAPSR3

ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE "pf=D:\sum\SUM\abap\var\SHADOW.TPP" delstopmark "buffer=SM1"

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

tp finished with return code: 0

meaning:

Everything OK

tp=>sapparam(1c): No Profile used.

tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline


TP.SAV:

#--------------------------------------------------------------

#---- MASKING file TP.ECO from D:\sum\SUM\abap\log

#---- TIME: 20131231104803 PHASE: MAIN_SHDRUN/ACT_UPG

#--------------------------------------------------------------

SAPup> Starting subprocess at 20131231104759

ENV: DBMS_TYPE=ora

ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

ENV: ORACLE_HOME=D:\oracle\SM1\11203

ENV: ORACLE_SID=SM1

ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

ENV: SAPDATA_HOME=D:\oracle\SM1

ENV: SAPSYSTEMNAME=SM1

ENV: auth_shadow_upgrade=1

ENV: dbs_ora_schema=SAPSR3

ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE "pf=D:\sum\SUM\abap\var\SHADOW.TPP" locksys SM1

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

tp finished with return code: 0

meaning:

Everything OK

tp=>sapparam(1c): No Profile used.

tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

Add a comment
10|10000 characters needed characters exceeded

Assigned Tags

Related questions

3 Answers

  • Best Answer
    Posted on Jan 09, 2014 at 11:36 AM

    Hello

    This is not normal. The ACT_UPG shouldn't run for 7 days.

    Are the logs at D:\sum\SUM\abap\tmp getting updated ?


    Regards

    RB

    Add a comment
    10|10000 characters needed characters exceeded

  • Posted on Jan 09, 2014 at 08:02 AM
    Add a comment
    10|10000 characters needed characters exceeded

  • Posted on Jan 09, 2014 at 08:05 AM

    Hello,

    This is not normal. This phase does not take so much time. Could you please check if some background job is failed and check if there is any dump in the system? Also, you can try by stopping the upgrade and start the tool again.

    Thanks,

    Sunny

    Add a comment
    10|10000 characters needed characters exceeded

Before answering

You should only submit an answer when you are proposing a solution to the poster's problem. If you want the poster to clarify the question or provide more information, please leave a comment instead, requesting additional details. When answering, please include specifics, such as step-by-step instructions, context for the solution, and links to useful resources. Also, please make sure that you answer complies with our Rules of Engagement.
You must be Logged in to submit an answer.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MB each and 10.5 MB total.