on 12-04-2013 3:12 AM
hi
HI All,
I have installed fresh sap router , windows 7 machine. I am starting the sap router facing issue below. iam trying to start the router it was giving the bellow command
E:\SAProuter>saprouter -r -S 3299 -K "p:CN=SOLMAN, OU=0001264579, OU=SAProuter,
O=SAP, C=DE "
trcfile dev_rout
no logging active
*** ERROR => invalid lines in './saprouttab', see 'dev_rout' [nirout.cpp 9591]
this is bellow is the log file dev_rout:
---------------------------------------------------
trc file: "dev_rout", trc level: 3, release: "720"
---------------------------------------------------
Wed Dec 04 08:27:39 2013
NiIHSBufInit: initialize hostname buffer (IPv4)
NiHLInit: alloc host buf (200 entries)
NiSrvLInit: alloc serv bufs (200 entries)
Wed Dec 04 08:27:40 2013
NiIInit: allocated nitab (811 at 000000000242FFD0)
NiIInit: host/serv bufs already initialized
NiPGetNodeAddrListInit: use GetAdaptersAddresses implementation (03)
NiPGetNodeAddrList03: adapter: 'Local Area Connection' (Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20) / 6)
NiPInsertSockAddr: got address '192.168.1.197' (unicast)
NiPGetNodeAddrList03: adapter: 'Local Area Connection 2' (Hamachi Network Interface / 6)
NiPInsertSockAddr: got address '25.119.139.154' (unicast)
NiPGetNodeAddrList03: adapter: 'Loopback Pseudo-Interface 1' (Software Loopback Interface 1 / 24)
NiPInsertSockAddr: got address '127.0.0.1' (unicast)
NiPGetNodeAddrList03: got 3 interface(s) from operating system
[0] IP-Address: 192.168.1.197
[1] IP-Address: 25.119.139.154
[2] IP-Address: 127.0.0.1
NiIGetServNo: servicename '3299' = port 3299
SAP Network Interface Router, Version 40.4
Compiled Oct 13 2013 23:52:20
command line arg 0: saprouter.exe
command line arg 1: -r
command line arg 2: -S
command line arg 3: 3299
command line arg 4: -V3
command line arg 5: -K
command line arg 6: p:CN=ACPSOLMAN,OU=0001145860,ou=sap,c=de
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
->> SncInit(prg=0, ini_fname=(NULL), &sec_avail=000000000202F638)
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
GetUserName()="Actiprocess" NetWkstaUser="Actiprocess"
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "D:\saprouter\nt-x86_64\sapcrypto.dll".
DlLoadLib success: LoadLibrary("D:\saprouter\nt-x86_64\sapcrypto.dll"), hdl 0, addr 0000000010000000
using "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc failed GetProcAddress("sapsnc_init_adapter") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
with error 127 = "The specified procedure could not be found."
DlLoadFunc successful GetProcAddress("gss_acquire_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_init_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_accept_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_process_context_token") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_delete_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_context_time") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_get_mic") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_verify_mic") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_wrap") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_unwrap") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_display_status") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_indicate_mechs") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_compare_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_display_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_import_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_buffer") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_oid_set") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_cred_by_mech") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_wrap_size_limit") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_export_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_import_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_names_for_mech") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_mechs_for_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_canonicalize_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_export_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
File "D:\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
DlLoadFunc successful GetProcAddress("sapcr_get_version") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("sapcr_get_secudir") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
SECUDIR="D:\saprouter" (from $SECUDIR)
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SAPCRYPTOLIB
Product Version = SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
<<- SncPDLInit()==SAP_O_K
<<- SncInit()==SAP_O_K
sec_avail = "true"
->> SncSetMyName(snc_hdl=0000000000000000, myname="p:CN=ACPSOLMAN,OU=0001145860,ou=sap,c=de")
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=ACPSOLMAN,OU=0001145860,ou=sap,c=de"
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiMyHostName: hostname = 'ACPSOLMAN'
main: pid = 7068, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiSelICreateSet: new set0
SiSelNInit: allocate 147952 bytes for FI (811)
NiSelIInit: size of set0 is 811
NiICreateHandle: hdl 1 state NI_INITIAL_LIS
NiIInitSocket: set default settings for new hdl 1/sock 416 (I4; ST)
Windows Version 6.1, Build 7601
Running on Windows Vista
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 1 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 1 FALSE
NiIListen: state of hdl 1 NI_LISTEN
SiSelNSet: sock 416 added to set pos 0
NiSelIAddMsg: added hdl 1 to set0
SiSelNSet: set events of sock 416 to: rp-
reading routtab: './saprouttab'
*** ERROR => invalid hop field (SNC), skip line 1 [nirout.cpp 9418]
<<- SncNameToAclKey_r()==SAP_O_K
in: name = "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=00000000024BABA0, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7639 pserv9
NiStrToAddrMask: '169.145.197.110' -> 169.145.197.110/32 (0/0)
*** ERROR => SncPGSSImportName()==SNCERR_GSSAPI [sncxxall.c 2636]
GSS-API(maj): An invalid name was supplied
Import of a name failed
name="p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE"
<<- SncNameToAclKey_r()==SNCERR_GSSAPI
in: name = "p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE"
*** ERROR => NiSncNameToAcl: SncNameToAclKeyU_r failed (sncrc=-4;'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE') [nisnc.c 812]
*** ERROR => SncName 'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE' unknown (rc=-17), skip line 7 [nirout.cpp 9453]
contents of routtab ('./saprouttab', 2 entries):
KT*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=00000000024B1EF8, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7639 pserv9
out: name = "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE"
p:CN=sapserv9, OU=SAProuter, O= 169.145.197.110/32 * *
D*,* ::/0 ::/0 * *
******* NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)
can any body knows the sloutuin please help me tahnks in advance
regards
vreddy
*** ERROR => invalid lines in './saprouttab', see 'dev_rout' [nirout.cpp 9591]
this is bellow is the log file dev_rout:
An invalid name was supplied
Import of a name failed
name="p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE"
<<- SncNameToAclKey_r()==SNCERR_GSSAPI
in: name = "p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE"
*** ERROR => NiSncNameToAcl: SncNameToAclKeyU_r failed (sncrc=-4;'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE') [nisnc.c 812]
*** ERROR => SncName 'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE' unknown (rc=-17), skip line 7 [nirout.cpp 9453]
contents of routtab ('./saprouttab', 2 entries):
Hi reddy,
Make sure that you entered the correct entries.
in log it show that you have entered
'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE'
please check that the entry has commas(,) in between
for ex
p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE'
Hope this helps,
Rg,
Nag
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello
Have you configured the saprouttab properly ?
It looks like your saprouttab configuration is incorrect.
If possible provide the saprouttab configuration file.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
*** ERROR => NiSncNameToAcl: SncNameToAclKeyU_r failed (sncrc=-4;'p:CN=sapserv9 OU=SAProuter, O=SAP, C=DE') [nisnc.c | 812] |
This should be your SNC Routers Name instead of sapservx in the saproutertab. Your own SNC Key is for CN=Your-Name
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hI
Thanks for the replay, i have changed the CN name in my saprouttab file , then new error comes
what is snc router name , i was given my system name in that, and i registered with sap. the bellow is new error:
rcfile dev_rout
****************************************************************************
ERROR SNC processing failed:
SncSetMyNameU
TIME Thu Dec 05 08:56:48 2013
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -17
MODULE nisnc.c
LINE 576
DETAIL NiSncInit: sncrc=-35
COUNTER 3
****************************************************************************
regards
vreddy
Hi,
Have you gown through the doc as posted earlier ?
Can you please tell which all steps you have done .
Have you added the ip of sapserv9 in your host file.
Check this note also.
1178684 No service connection: "SNC processing failed"
Thanks
Rishi abrol
HI
Thanks for the replay , this is the complete dev_rout log file.
---------------------------------------------------
trc file: "dev_rout", trc level: 3, release: "720"
---------------------------------------------------
Thu Dec 05 17:40:50 2013
NiIHSBufInit: initialize hostname buffer (IPv4)
NiHLInit: alloc host buf (200 entries)
NiSrvLInit: alloc serv bufs (200 entries)
NiIInit: allocated nitab (811 at 00000000024DFFB0)
NiIInit: host/serv bufs already initialized
NiPGetNodeAddrListInit: use GetAdaptersAddresses implementation (03)
NiPGetNodeAddrList03: adapter: 'Local Area Connection' (Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC (NDIS 6.20) / 6)
NiPInsertSockAddr: got address '192.168.1.197' (unicast)
NiPGetNodeAddrList03: adapter: 'Local Area Connection 2' (Hamachi Network Interface / 6)
NiPInsertSockAddr: got address '25.119.139.154' (unicast)
NiPGetNodeAddrList03: adapter: 'Loopback Pseudo-Interface 1' (Software Loopback Interface 1 / 24)
NiPInsertSockAddr: got address '127.0.0.1' (unicast)
NiPGetNodeAddrList03: got 3 interface(s) from operating system
[0] IP-Address: 192.168.1.197
[1] IP-Address: 25.119.139.154
[2] IP-Address: 127.0.0.1
NiIGetServNo: servicename '3299' = port 3299
SAP Network Interface Router, Version 40.4
Compiled Oct 13 2013 23:52:20
command line arg 0: saprouter.exe
command line arg 1: -r
command line arg 2: -S
command line arg 3: 3299
command line arg 4: -V3
command line arg 5: -K
command line arg 6: p:CN=ACPSOLMAN,OU=0001145860,OU=SAProuter,O=SAP,C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
->> SncInit(prg=0, ini_fname=(NULL), &sec_avail=000000000202F638)
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
GetUserName()="Actiprocess" NetWkstaUser="Actiprocess"
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "D:\saprouter\nt-x86_64\sapcrypto.dll".
DlLoadLib success: LoadLibrary("D:\saprouter\nt-x86_64\sapcrypto.dll"), hdl 0, addr 0000000010000000
using "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc failed GetProcAddress("sapsnc_init_adapter") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
with error 127 = "The specified procedure could not be found."
DlLoadFunc successful GetProcAddress("gss_acquire_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_init_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_accept_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_process_context_token") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_delete_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_context_time") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_get_mic") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_verify_mic") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_wrap") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_unwrap") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_display_status") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_indicate_mechs") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_compare_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_display_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_import_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_buffer") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_release_oid_set") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_cred") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_cred_by_mech") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_wrap_size_limit") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_export_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_import_sec_context") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_names_for_mech") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_inquire_mechs_for_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_canonicalize_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("gss_export_name") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
File "D:\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
DlLoadFunc successful GetProcAddress("sapcr_get_version") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc successful GetProcAddress("sapcr_get_secudir") from "D:\saprouter\nt-x86_64\sapcrypto.dll"
SECUDIR="D:\saprouter" (from $SECUDIR)
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SAPCRYPTOLIB
Product Version = SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
<<- SncPDLInit()==SAP_O_K
<<- SncInit()==SAP_O_K
sec_avail = "true"
->> SncSetMyName(snc_hdl=0000000000000000, myname="p:CN=ACPSOLMAN,OU=0001145860,OU=SAProuter,O=SAP,C=DE")
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=ACPSOLMAN,OU=0001145860,OU=SAProuter,O=SAP,C=DE"
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiMyHostName: hostname = 'ACPSOLMAN'
main: pid = 4980, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiSelICreateSet: new set0
SiSelNInit: allocate 147952 bytes for FI (811)
NiSelIInit: size of set0 is 811
NiICreateHandle: hdl 1 state NI_INITIAL_LIS
NiIInitSocket: set default settings for new hdl 1/sock 412 (I4; ST)
Windows Version 6.1, Build 7601
Running on Windows Vista
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 1 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 1 FALSE
NiIListen: state of hdl 1 NI_LISTEN
SiSelNSet: sock 412 added to set pos 0
NiSelIAddMsg: added hdl 1 to set0
SiSelNSet: set events of sock 412 to: rp-
reading routtab: './saprouttab'
<<- SncNameToAclKey_r()==SAP_O_K
in: name = "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=000000000256AB90, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7639 pserv9
NiStrToAddrMask: '169.145.197.110' -> 169.145.197.110/32 (0/0)
*** ERROR => SncPGSSImportName()==SNCERR_GSSAPI [sncxxall.c 2636]
GSS-API(maj): An invalid name was supplied
Import of a name failed
name="p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE"
<<- SncNameToAclKey_r()==SNCERR_GSSAPI
in: name = "p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE"
*** ERROR => NiSncNameToAcl: SncNameToAclKeyU_r failed (sncrc=-4;'p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE') [nisnc.c 812]
*** ERROR => SncName 'p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE' unknown (rc=-17), skip line 6 [nirout.cpp 9453]
*** ERROR => invalid permission field (Access), skip line 7 [nirout.cpp 9384]
NiStrToAddrMask: '192.168.*.*' -> 192.168.0.0/16 (0/1)
NiStrToAddrMask: '169.145.197.110' -> 169.145.197.110/32 (0/0)
NiIGetServNo: servicename '3299' = port 3299
contents of routtab ('./saprouttab', 3 entries):
KT*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=0000000002561EE8, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7639 pserv9
out: name = "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE"
p:CN=sapserv9, OU=SAProuter, O= 169.145.197.110/32 * *
P*,* 192.168.0.0/16 169.145.197.110/32 3299 *
D*,* ::/0 ::/0 * *
******* NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)
Hi reddy,
*** ERROR => SncPGSSImportName()==SNCERR_GSSAPI [sncxxall.c 2636]
GSS-API(maj): An invalid name was supplied
Import of a name failed
name="p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE"
<<- SncNameToAclKey_r()==SNCERR_GSSAPI
in: name = "p:CN=ACPSOLMAN, OU=0001145860,OU=SAProuter O=SAP, C=DE"
error regarding the sso.
make sure that you have installed a proper router certificate.
and also make sure that you have maintained the router details in Tx-SSO1.
For more details check this note
Hope it helps,
Rg,
Nag
Hi,
Please check the below document
Seems some problem with the SNC set up or with the service user which you are using to start.
Thanks,
Jagadish.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
You are using sapserv9 .
You are trying to use this
sapserv9 (169.145.197.110) for customers in Asia.
Have you adjusted your router file as per the below link.
https://websmp101.sap-ag.de/saprouter-sncdoc
Thanks
Rishi Abrol
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
90 | |
10 | |
10 | |
10 | |
7 | |
7 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.