on 11-26-2013 12:03 PM
Dear All,
I am facing below issue during EHP 6 upgradation. Extraction phase successfully completed but now stuck on below INCLUSION phase
SAPup_troubleticket.log
SAPup broke during phase EHP_INCLUSION in module PREP_EXTENSION / Extension module
Error Message: Unable to generate addon queue. Return Code = -99, Reason = "Add on installation/upgrade not yet complete.
CRTs are required", check log file 'SPDA_EHP_INCLUSION.LOG' for details
If you put new packages in the download directory, use option 'init' to upload them
Summary of SAPup:
-------------------------------------------------------------
SAPehpi Release: lmt_005
SAPehpi Version: SAPup release lmt_005 version 54.000
Start Release: 700
Target Release: 731
SPDA_EHP_INCLUSION.LOG
2 ETN085X"Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
3 ETN112 The OCS Package Queue is empty
2 ETN085X"Adding Add-on Installation Queue" " " " " " "
2EETN403 Add on installation/upgrade not yet complete. CRTs are required (which CRT and Add-On while I already download stack after successfully synch my test system(PRDSPT) from LMDB)
1 ETN214X."**************************************************"
1 ETN251 End of phase: "'Add-on Queue Calculation'"
1 ETN254 End date: "26.11.2013"
1 ETN255 End time: "15:44:11"
1 ETN214 ."**************************************************"
Please find attachments for complete log.
Regards,
I'm having this same issue. As information, SP8 of SUM throws the same error.
Any updates on the problem from your side?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
from SPDA_EHP_INCLUSION.LOG
Calculation of the installation queue of included add-ons ...
The calculation is based on the following software component vector:
Component: "FINBASIS" rel. "604", Support Package level: "0009" (component type "N")
Component: "SEM-BW" rel. "604", Support Package level: "0009" (component type "I")
Component: "VIRSANH" rel. "530_700", Support Package level: "0018" (component type "C")
Component: "PI_BASIS" rel. "701", Support Package level: "0008" (component type "X")
Component: "SAP_ABA" rel. "701", Support Package level: "0008" (component type "S")
Component: "SAP_BASIS" rel. "701", Support Package level: "0008" (component type "S")
Component: "SAP_BW" rel. "701", Support Package level: "0008" (component type "W")
Component: "ST-PI" rel. "2008_1_700", Support Package level: "0008" (component type "X")
Component: "BI_CONT" rel. "704", Support Package level: "0007" (component type "I")
Component: "CPMBPC" rel. "750", Support Package level: "0008" (component type "I")
Component: "SAP_BS_FND" rel. "701", Support Package level: "0009" (component type "W")
Component: "ST-A/PI" rel. "01Q_700", Support Package level: "0002" (component type "A")
You want to install the following add-on components:
Component: "FINBASIS" rel. "736", Support Package level: "0" (component type "N")
Component: "SEM-BW" rel. "736", Support Package level: "0" (component type "I")
Component: "VIRSANH" rel. "530_731", Support Package level: "0" (component type "C")
Component: "PI_BASIS" rel. "731", Support Package level: "0" (component type "X")
Component: "SAP_ABA" rel. "731", Support Package level: "0" (component type "S")
Component: "SAP_BASIS" rel. "731", Support Package level: "0" (component type "S")
Component: "SAP_BW" rel. "731", Support Package level: "0" (component type "W")
Component: "ST-PI" rel. "2008_1_710", Support Package level: "0" (component type "X")
Component: "BI_CONT" rel. "747", Support Package level: "0" (component type "I")
Component: "CPMBPC" rel. "801", Support Package level: "0" (component type "I")
Component: "SAP_BS_FND" rel. "731", Support Package level: "0" (component type "W")
Component: "MDG_FND" rel. "731", Support Package level: "0" (component type "A")
Component: "POASBC" rel. "100_731", Support Package level: "0" (component type "A")
Component: "WEBCUIF" rel. "731", Support Package level: "0" (component type "A")
"Calculate pure CRT Queue" "for installed Add-ons" "and already applied Support Packages" " "
The OCS Package Queue is empty
"Adding Add-on Installation Queue" " " " " " "
Package "SAPK-736GHINFINBASIS" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-736GHINSEMBW" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-535GGINVIRSANH" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-747GHINBICONT" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-801GGINCPMBPC" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-731GHINSAPBSFND" : "Is an add-on exchange upgrade package" "->" "reject this package"
Package "SAPK-102GGINPOASBC" : "Is an add-on exchange upgrade package" "->" "reject this package"
Add on installation/upgrade not yet complete. CRTs are required
SAP Active Gloval Support got me running, here is what they had me do. It appears that MOPZ downloaded too many things (notable old SAINT/CRT packages). Removing them from the download directory and out of the EPS inbox got me past the point of failure.
First:
remove these packages from the EPS-Inbox using transaction SEPS
transaction(Goto -> Inbox):
SAPK-700Z1INCPMBPC
SAPK-750Z1INCPMBPC
SAPK-750Z2INCPMBPC
Second:
remove CPMBPC750.SAP from the download directory.
Lastly:
repeat the phase from the beginning
Hello
There will be few log files in the <upgrade_directory>/abap/log starting with the name SPDA_*
You may upload all these or check all these log files.
I strongly believe the stack file is not created properly for the upgrade.
Have you maintained the product system in the Solution Manager LMDB ?
I can see in the log file that you are adding certain Add-on's that are not present in the system like SRM_SERVER. I am not sure why you have these in the logs. You should review the stack file and check these.
Lastly, preparation is one of the inevitable task for an upgrade activity. You should read the upgrade guide and make sure the system is ready to start the upgrade.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello
I suggest you to recreate the stack file and download the files from the download basket with the help of SAP Download Manager.
For me it looks like the SUM tool is complaining that the files present in the stack file are missing in the downloads directory.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear all,
I reset queue and start the sum from scratch but still getting same
2 ETQ142 Addon queue calculation failed, rc = "-99", reason = "Add on installation/upgrade not yet complete. CRTs are required"
4 ETQ399 (trc) R3upNcversWriteToFile: NCVERS file NCVERSTEMP.DMP written (rc=0)
4 ETQ399 Addon queue state changed from 'INITIAL' to 'ERROR'.
1EETQ399 Last error code set is: Unable to generate addon queue. Return Code = -99, Reason = "Add on installation/upgrade not yet complete. CRTs are required", check log file 'SPDA_EHP_INCLUSION.LOG' for details
If you put new packages in the download directory, use option 'init' to upload them
1EETQ204 Upgrade phase "EHP_INCLUSION" aborted with severe errors ("20131126215119")
please find attched file.
Regards
Hi,
Can you please tell me the SPAM/SAINT version in your system currently as there was issue in 700 in SPAM .
Please check if you are not effected.
1387523 - Wrong completeness check during queue calculation in EHPI
1285377 - Incomplete error message in phase EHP_INCLUSION of EHPI
Hope you would have delete the files from the EPS/in directory and SUM tool also . Uncared and start it again. Do you see any other log file update in the sum tool dir.
Thanks
Rishi abrol
hi Rishi,
Can you please tell me the SPAM/SAINT version in your system currently as there was issue in 700 in SPAM
The SPAM 7.00/51 is the part of stack and now SPAM is updated with this level.
Hope you would have delete the files from the EPS/in directory and SUM tool also . Uncared and start it again. Do you see any other log file update in the sum tool dir.
yes. I deleted the files from EPS/in. I did copy all *.SAR(not whole folder because folder have some txt files) from EHP6 folder and past EPS/in and SUM automatically extracted all *.SAR files during Extraction phase while I did not uncar the files manually
Regards,
Hi,
I can think of two ways as there is no error message generated.. Can you please tell the source and the target SP level. You can try using SP08 and see the note also.
1528990 - SP Equivalence for update/upgrade to SAP NW 7.30
First we run the tool in the debug mode and see if extra logs are being written.
Below is the process to run the tool in debug mode.
- Exit SUM GUI and SL controller
- Set com.sap.sdt.severity to DEBUG in the following files:
SUM\sdt\param\logging.properties
SUM\sdt\prop\logging.properties
SUM\java\param\logging.properties
,,
- Restart the SL Controller and SUM GUI and repeat the failing step
to generate the new trace file with more details
- Attach the following log files from the following folder:
SUM\java\log
SUM\java\trc
SUM\sdt\log
SUM\sdt\trc
But this we only do it when sap suggest you yo do it.
Second thing try to check the LMDB/SMSY , Push the data again to the SLD and try to generate the stack file again.
Can you also check EHP_INCLUSION.ELG
Thanks
RishI abrol
Dear Rishi,
thanks for your support,
Please check my last thread which is the part of this upgradation.
http://scn.sap.com/thread/3458256
I have changed the value as per your last reply.
SUM\sdt\param\logging.properties
#### Set up tracing severity
#com.sap.sdt.severity = WARNING
com.sap.sdt.severity = DEBUG
SUM\sdt\prop\logging.properties
#### Set up tracing severity
#com.sap.sdt.severity = ERROR
com.sap.sdt.severity = DEBUG
SUM\java\param\logging.properties
It is only ABAP instance (but I did it)
Please find attached trc and log( SourceSystem_SP is included in log folder).
Note>>> Please remove .txt from attached files.
Second thing try to check the LMDB/SMSY , Push the data again to the SLD and try to generate the stack file again.
you mean i need to regenerate and download a new stack(its lenghty task due to low internet speed). I only getting CRTs are required while if there is missing any files then i got message like not found a SPs.
FYI.... i m using SUM9.
Regards,
Hi,
I just check the trace but dint find any thing any unusual. Only thing that in the target it is showing SHOP FLOOR DISPATCHER 1.0 also.
From the source release
SAP_BASIS | 700 | 0025 | SAPKB70025 |
SAP_ABA | 700 | 0025 | SAPKA70025 |
PI_BASIS | 2006_1_700 | 0015 | SAPKIPYM15 |
ST-PI | 2008_1_700 | 0008 | SAPKITLRD8 |
SAP_BW | 700 | 0027 | SAPKW70027 |
SAP_AP | 700 | 0025 | SAPKNA7025 |
SAP_APPL | 600 | 0020 | SAPKH60020 |
SAP_HR | 600 | 0007 | SAPKE60007 |
EA-IPPE | 400 | 0006 | SAPKGPID06 |
EA-APPL | 600 | 0006 | SAPKGPAD06 |
EA-DFPS | 600 | 0006 | SAPKGPDD06 |
EA-FINSERV | 600 | 0006 | SAPKGPFD06 |
EA-GLTRADE | 600 | 0006 | SAPKGPGD06 |
EA-HR | 600 | 0007 | SAPKGPHD07 |
EA-PS | 600 | 0006 | SAPKGPPD06 |
EA-RETAIL | 600 | 0006 | SAPKGPRD06 |
FINBASIS | 600 | 0006 | SAPK-60006INFINBASIS |
ECC-DIMP | 600 | 0006 | SAPK-60006INECCDIMP |
ERECRUIT | 600 | 0006 | SAPK-60006INERECRUIT |
FI-CA | 600 | 0019 | SAPK-60019INFICA |
FI-CAX | 600 | 0017 | SAPK-60017INFICAX |
INSURANCE | 600 | 0006 | SAPK-60006ININSURANC |
IS-CWM | 600 | 0006 | SAPK-60006INISCWM |
IS-H | 600 | 0006 | SAPK-60006INISH |
IS-M | 600 | 0006 | SAPK-60006INISM |
IS-OIL | 600 | 0006 | SAPK-60006INISOIL |
IS-PS-CA | 600 | 0006 | SAPK-60006INISPSCA |
IS-UT | 600 | 0006 | SAPK-60006INISUT |
LSOFE | 600 | 0006 | SAPK-60006INLSOFE |
SEM-BW | 600 | 0006 | SAPKGS6006 |
From the above support pack that SUM tools has detected are just basic ERP component and but cant see that SRM_SERVER is part of it. But in the add-on i can see all the component. I think it would be good if you select the component properly that you want on EHP 6 and if they it is possible.
Please sync lmdb/smsy with the SLD and try to generate the stack file again....
Thanks
Rishi Abrol
Hello Jamil,
The issue seems to be related to the error " Add on installation/upgrade not yet complete. CRTs are required" .
Refer to the SAP Note 1037374 - CRTs for CPRXRPM 400 for the resolution.
Check this thread too: https://scn.sap.com/thread/1179905
Regards,
Mudasir.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
It appears to me that the ST-PI files are missing.
Can you check whether the ST-PI files are present ?
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I don't see any line in the logs that it says that about the conflict.
Only below lines.
2WETQ399 File 'G:/usr/sap/trans/EPS/in\51039102_13.ZIP' size 21598kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028879.PAT' size 21kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028881.PAT' size 19kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028882.PAT' size 19kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028884.PAT' size 19kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028885.PAT' size 19kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028890.PAT' size 26kB could not be recognized!
2WETQ399 File 'G:/usr/sap/trans/EPS/in\CID0020068250_0028891.PAT' size 28kB could not be recognized!
So would suggest just reset the tool delete all the files from the ERP/In and restart the tools.
Because if there is any miss match it should say like this.
Installation Package for add-on <(>&<)>1 rel.<(>&<)>2 does not exist
Thanks
Rishi Abrol
User | Count |
---|---|
95 | |
11 | |
11 | |
6 | |
6 | |
4 | |
4 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.