09-09-2005 11:26 AM
Dear all!
This is the first time i work with ALV. I would like to know how to create an ALV where i need to select a line press enter then run another program using the selected data from the ALV.
Thank you in advance for your help.
Sincerely,
Hajar
09-09-2005 11:32 AM
hi try this code.
REPORT zdemo_alvgrid .
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
*----
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
************************************************************************
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
&----
*& Form BUILD_FIELDCATALOG
&----
Build Fieldcatalog for ALV Report
----
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
&----
*& Form BUILD_LAYOUT
&----
Build layout for ALV grid report
----
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
&----
*& Form DISPLAY_ALV_REPORT
&----
Display report using ALV grid
----
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_callback_html_end_of_list = 'END_OF_LIST_HTML'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
&----
*& Form DATA_RETRIEVAL
&----
Retrieve data form EKPO table and populate itab it_ekko
----
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
09-09-2005 11:32 AM
hi try this code.
REPORT zdemo_alvgrid .
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
*----
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
************************************************************************
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
&----
*& Form BUILD_FIELDCATALOG
&----
Build Fieldcatalog for ALV Report
----
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
&----
*& Form BUILD_LAYOUT
&----
Build layout for ALV grid report
----
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
&----
*& Form DISPLAY_ALV_REPORT
&----
Display report using ALV grid
----
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_callback_html_end_of_list = 'END_OF_LIST_HTML'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
&----
*& Form DATA_RETRIEVAL
&----
Retrieve data form EKPO table and populate itab it_ekko
----
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
09-09-2005 11:33 AM
Hi,
You can create ALV by using
REUSE_ALV_GRID_DISPLAY function module
data : C_USER_COMMAND TYPE slis_formname VALUE 'USER_COMMAND'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
I_CALLBACK_USER_COMMAND = C_USER_COMMAND
it_fieldcat = it_fcat[]
i_save = C_A
is_variant = gs_variant
it_events = TEMP_event[]
is_print = gs_print
TABLES
t_outtab = ITAB_DISPLAY
EXCEPTIONS
program_error = 1
OTHERS = 2.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
IF R_UCOMM = '&IC1'.
it is harcoded since constant special character is not allowing
IF RS_SELFIELD-TABINDEX NE 0.
clear itab_ap.
clear itab_ar.
L_BELNR = RS_SELFIELD-value.
READ TABLE ITAB_AP with key belnr = L_BELNR.
IF SY-SUBRC <> 0 and RS_SELFIELD-FIELDNAME =
K_BELNR1.
EXIT.
ENDIF.
set key and hotspot for required entries
CASE RS_SELFIELD-FIELDNAME.
WHEN K_xxxx. "BILLING NUMBER
{ write your code }
ENDCASE.
ENDIF.
ENDIF.
ENDFORM. " SELSAVE
you need to fill the field catalog also.
Cheers,
Sasi
09-09-2005 11:37 AM
Hi,
search in se38 for BCALV*
and have a look at report BCALV_GRID_VERIFY
Andreas
09-09-2005 12:32 PM